Print Data Sheet

Click to enlarge


 The Aquatape Level Gauge is a packaged system for monitoring level in water and water-based noncorrosive materials. Applications include rivers, reservoirs, wells, waste water, potable water, sea water and municipal sludge.  The Aquatape system consists of the unique resistance-tape sensor, a compact filter assembly, a sensor housing and a 4-20mA current transmitter. It is available in overall lengths of 3 to 50 feet (1 to 15 meters). The filter assembly protects the sensor from moisture and contaminates and provides pressure equalization.

Aquatape can also be installed with our wireless transceiver, model WRT, completly eliminating the need to run wire to the sensor.


 • Complete level gauging package for all water and wastewater applications

• All electric resistance-tape sensor for stable output; no moving parts to stick or break

• Tank top mounted for easy installation 

• Virtually maintenance-free; just a five-minute filter change every 24 to 48 months

• Transmitter is completely field adjustable

• Intrinsically Safe - FM approved

• Combined level and temperature capability

• Stillpipe not required in non-agitated applications

• Works with Wireless, WRT & WBR System


Sensor Overall Length: 3 to 50 feet or 1 to 15 meters.

Operating Temperature Range: 5° to 140°F (-15° to 60°C ).

Wetted Materials: Polypropylene, Stainless Steel, Glassfilled

Polypropylene. Slip nut is Polypropylene.

Active Helix: Starts 10.6 in. (270mm) from sensor zero,

extends to approx. 1.6 in. (40mm) from sensor bottom.

Helix Resolution: 1/4 inch (5mm).

Actuation Depth: Nominal 5 inch (125mm) head of water, offset at calibration.

Specific Gravity Effect: 1% increase in SG causes nominal .05 in. (1.25mm) increase in indicated level,

(can be calibrated).

Home  Marine Products  Industrial Products  Contact Us  About Us  Downloads  Site Map